Posts: 115
Threads: 1
Joined: May 2023
Reputation:
14
12-15-2023, 02:56 PM
(This post was last modified: 12-15-2023, 02:59 PM by solarlab.)
Interesting - do you have a link to these patents? Is there a "write-up" regarding the working devices that were tested by
the patent offices and labs?
A brief description of 'Your Developments' (since they are open source) would also be appreciated. Thanks.
It doesn't have to be as detailed as the "LinGen" but a brief conceptual description might be useful for study purposes.
TIA - Regards
Posts: 63
Threads: 3
Joined: Nov 2023
Reputation:
0
@solarlab, if you check on overunityresearch forum Arie DeGeus you can find out all his patents and with your level of expertise can see if I am talking bs or truth. Also you can test easy few of his patents with your software even without building anything.
One of my setups where I have decided to advance comprise a galvanic cell based on Bagdad Battery, dumped into capacitor for temporary storage than a signal generator, than a voltage doubler. But signal generator which is a PWM £0.8-£3 can be replaced with a zvs than pancake coils. Galvanic cell made of plastic tubes 20 mm diameter with two coils in each, 1 aluminium and 1 copper, where aluminium can be replaced with iron wire and as electrolyte is using potable water, from time to time water need to be replenished and only aluminium/iron need to be replaced when they are consumed … but they last very long time and water should be purged when not used the system … rain water is even better and cost nothing. Currently working on aluminium consumption depending on type of usage to find out how many cells to be used with lowest consumption for given power drawn per usage time.
Electricity generated doesn’t need to be stored as would render inefficient the system and will be produced on demand basis.
In order to preserve energy generation one wire system for usage must be implemented.
Reference: “what if I did this” youtube channel, Joel Lagace youtube channel, WO2015/057093 A2 ecoinvent.ro
Also, NL1031494 Arie deGeus patent can be used in combination with galvanic cell described above for direct powering domestic appliances. Everything that uses aether will be over unity. Any combination of low frequency pulsed curent (ground loop) aka, disturbance in local environment and high frequency pulsed AC aka amplification with help/use of aether (high frequency standing waves) will be overunity or EEG as you prefer to say.
Also, NL1032750 Arie DeGeus can be used with galvanic cell as above.
So, any power source should be used without using bigoilco grid, we don’t need them at all.
Also, series-parallel setup for batteries must be used for efficiency and recycle of electricity (“what if I did this” youtube channel)
Low energy input for disturbance and high output amplification using aether, exploiting natural equilibrum where we draw energy that “flow” in our systems to meet the balance state.
Very simple and basic setups, cheap to make with off the shelf components … this is what we need especially for open source, ability to use math skills for given formulas to help scale up/down according to anyone needs and eliminate expensive measurement equipment/instruments.
Also I want to mention Lidmotor and Ufopolitics youtube channels with very useful and successful experiments.
Posts: 115
Threads: 1
Joined: May 2023
Reputation:
14
Thanks Classic, looks like some interesting stuff.
However at this point I'm busy completing a device design of an enhanced (V2) LinGen.
Will have to leave the "jello huggin" to a later date when I have more time and interest.
Take care, Regards, SL