11-20-2025, 06:35 PM
(This post was last modified: 11-20-2025, 06:45 PM by Vortex.
Edit Reason: forgot to add a detail.
)
I have learnt the main mechanism by which Testatika and various other devices operate.
The core principle is about generation of "Evo's", These are Exotic Vacuum Objects, they have been seen etched into metal in many microscopic analysis of LENR experiments.
They are Aetheric toroid's. And they are generated in sudden electrical discharges.
When they pass through a charged window (a hole in a metal HV charged disc | Flying through a coil without opaque structure | transparent material with electropositive/electronegative influence | through ionized air) the emission becomes charged or conditioned.
These are the same stinging rays that Tesla reported.
These are hen collected and then recombined in the spark.
This energy gets stronger and stronger!
Eventually it begins to provide free electrical energy.
In the image, I show a very simple setup, I just drilled holes in 2 smaller tin cans.
I then put 2 outer tin cans around each.
I hooked up half the circuit with iron wire and half with Copper wire, with contact between the copper and one set of cans.
And contact between the iron and the other set of cans.
This made a very potent energy that was not all captured by the outer Cylinder so I could feel these rays on my face.
If you then made a second set of them inside where a source of electrical energy, maybe a Wimhurst, maybe some other HV, and ideally DC source was was involved, this spark gap would be creating huge levels of this effect.
Note, this is the same way that Podketnov's and Morton's spark impusle generators worked and various others!
Indeed Tesla's experiments also had the requisite setup, as does Edwin Gray.
Note, as with the copper-iron difference, there are many different influences besides just electrical charge that the Evo can be conditioned with.
Just as light can cut steel, light can affect the aether and the first image below is able to use the same principle (optimized for 2D) to create a subtle but real aetheric energy some can feel! Try putting your hand in front of the screen.
The core principle is about generation of "Evo's", These are Exotic Vacuum Objects, they have been seen etched into metal in many microscopic analysis of LENR experiments.
They are Aetheric toroid's. And they are generated in sudden electrical discharges.
When they pass through a charged window (a hole in a metal HV charged disc | Flying through a coil without opaque structure | transparent material with electropositive/electronegative influence | through ionized air) the emission becomes charged or conditioned.
These are the same stinging rays that Tesla reported.
These are hen collected and then recombined in the spark.
This energy gets stronger and stronger!
Eventually it begins to provide free electrical energy.
In the image, I show a very simple setup, I just drilled holes in 2 smaller tin cans.
I then put 2 outer tin cans around each.
I hooked up half the circuit with iron wire and half with Copper wire, with contact between the copper and one set of cans.
And contact between the iron and the other set of cans.
This made a very potent energy that was not all captured by the outer Cylinder so I could feel these rays on my face.
If you then made a second set of them inside where a source of electrical energy, maybe a Wimhurst, maybe some other HV, and ideally DC source was was involved, this spark gap would be creating huge levels of this effect.
Note, this is the same way that Podketnov's and Morton's spark impusle generators worked and various others!
Indeed Tesla's experiments also had the requisite setup, as does Edwin Gray.
Note, as with the copper-iron difference, there are many different influences besides just electrical charge that the Evo can be conditioned with.
Just as light can cut steel, light can affect the aether and the first image below is able to use the same principle (optimized for 2D) to create a subtle but real aetheric energy some can feel! Try putting your hand in front of the screen.

