Join us in the search for Free Energy. Share your experiments and discoveries, post your build logs, and discuss.

Proceed At Your Own Risk. Experimenters should be knowledgeable on Electrical Safety and apply proper safety protocols as needed.

New Members- Check Your Spam Folder For Activation Link

Please read our Rules. Any problems or suggestions- Contact Us

 


Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
energy trapped.
#1
While we know that any electricity power or near to it* can be converted succesully with additional energy, this is possible by parts that has excess. Anybody knew that putting flywheel on a qmogen can give extra durability on high tasks*, so when we are playing electromagneticity then we can obviously grab some more using right electronic parts, like Caps, Coils and Resistors (evna somehow), so to abstract the energy semiconductors have to be tuned to right frequencies if they are rightly done in an application. Sometimes cause of errors desoldered parts wouldn't work. We only want energy.

That's why magnetism and electricity including flows of particles can be trapped by a system. 

Some knew that Kapanadze will die after electromagnetism will change, so on moon this type of a system wouldn't start. On the surface of Earth there are so many TX - transmitting or heating devices that system will go on a junk energy that they radiate. But if you tune to space (ErP) this will work anywhere. Tadam!

Bye!

Dxer87
Free enery rule:
"Any application should be closed that's why some percentage of the distorb energy will be grabbed again and toot outside."


Attached Files Thumbnail(s)
       
Reply
#2
I have quite some experience with trapping electricity or 'trapping electrons' as it is also referred to.
Firstly, a capacitor Traps electricity. A battery traps electricity. Calling it 'stored' because it can be 'bled off' slowly, belies the true Nature or the Physics of "Energy, Frequency and Vibration".

Just last month I participated in an experiment where we trapped electricity in a circuit and the vibrational energy trapped was not bled off but continued to illuminate the 'bulb'. A light bulb was connected to the 'source' by 2 wires and it lit up like any brake light will do. But it stayed on after the wires were disconnected. We state that it is the apparatus's methodology of Vibrational energy production that allows for the Vibrations to be 'trapped' and used forever in any electrical circuit. The Light we got was 'cold'. Heat is the vibrations being 'bled off'.

This was a continuation of a series of experiments where one builds a 'static generator' (without moving parts) by the interaction or placement of the Eddy Currents in 90 degrees to each other and using the vibrations to light up every kind of light bulb ever invented. Or one can touch the 'electrodes' or output terminals and GET HEALING electricity or electrocuted with Pure Flat Line DC the FDA would argue. The earlier experiments I have referred to, needed a 'coil' in the circuit to 'trap' the Vibrations (electrons) in perpetuity to cause Light bulbs and LED's to stay on forever, or at least the several days the experiment lasted.
What is noted here in our trappings is, the 'electricity' isnt generated by moving parts, but by a source made by interacting the Eddy Currents inherent in any magnetic Field. Iron Filings show these 'eddy currents'. We have worn out several green cards determining this.

Spinning a Magnet's Force Lines past an Iron Core that then transmits these Induced Vibrations to the Copper wire wrapping the iron core does not meet the requirements for trapping this 'type' of vibrational energy. (car batteries are in another league and and require KNOWING the 4 Phases of Electricity to replicate)

Activating the Crystal matrix to Induce an electrical current in wires is a 'one time' event even if its 50 or 60 times a second. This is not the 'electrical generator' you are looking for. You can 'store them and bleed them off but you cant make these "type" of vibrations DO WORK forever or 'trap' them in a Circuit and lite up a bulb forever.

The Vibrations one is looking for is a permanent change in the Vibrations that the Crystal Matrix exhibits from Stationary or static Interacting Fields.

There were no less than 4 static generators on the bench last month. Each one lit up an incandescent light bulb (a coil filament) and the bulb, isolated and not connected to any 'wires' or input source strayed on for days. Leds are trickier but equally easy to light up with a 'frequency' (which is what Vibrations are) and stayed on for days. Some brands only lasted for minutes. ALL NEWER type light bulbs are made so this 'forever' effect is near impossible to obtain.

But its not only light bulbs. We places in the forever circuit, 3 induction hotplates to test the limits of trapped electricity.

From what I read on this site, this level of science is light years ahead of modern thinking and modern thinking on electricity is so backwards, it may take decades for inventors to understand what it is they are trying to trap. I wish you well in your endeavor dxer_87

A concise explanation for trapped electricity.
When one hammers a church Bell, it Vibrates and produces a tone of a unique vibration based upon its Construct. But the Vibration Bleeds off and eventually ceases to Ring.
A Magnets Lines of Force passing a laminated core wrapped in copper wires, Vibrates the Wires the same as the Bell being rung. Electricity is only vibrating Crystals being rung by Force Lines.
If the Bell is insulated, it would be a Capacitor Bell.

What we want is to ACTIVATE the Elemental Vibrations that make the conductor the 'element' that we know it by, with a new Magnetic Frequency (a double North Pole Negative Frequency) so the Crystal Matrix takes on a New Memory or a New Vibrational Signature. This New permanent Frequency, can be likened to Trapping a frequency in an Isolated Circuit.

Healing with Electricity, is placing a New Frequency within the Body's Crystal matrix. It can be done by batteries or AC to DC transformers but Static Generators generate the 'Best' vibrations.
Until one fully understands how the body and electricity works, you will have Buckleys chance of trapping electrons. Its all electricity Jim, but not as you know it, says a former star trekker.

Understanding trapped electricity involves understanding Light.
We cannot SEE Light. We can only see its REFLECTION after it bounces off an object. What we want is the Vibrational energy before it is reflected as the North or Negative portion of the Energy "wave". Science and this forum has little in the way of Cold energy physics by virtue of giving this statement credence... "That's why magnetism and electricity including flows of particles can be trapped by a system." There are NO particles in electricity.

How many decades has it been that this particle science has failed the over unity people?
Laminated Cores are used to diminish Eddy Currents in ALL generators where the objective is to increase electrical production. The very apparatus we use to generate electricity uses a Laminated Core wrapped in wires, designed to decrease potential. USE a SOLID Core in any transformer. "They" dont want you to be 'efficient'. Trapping Vibration energy in iron wires is far more easy than using copper and was essentially a JP Morgan pre-requisite in construction so a Meter could measure the 'loss' rather than the vibrations used. Make the circuit generate Heat so we can charge for something. And if you say anything Mr Tesla, we will burn down more than just your tower next time. I have probably said more than I am permitted to say. Its not that the world isnt ready for this cold perpetual energy, The world just has Fake Physics so cant understand it.
Reply
#3
Would love a diagram on some of that, like the generator with the eddy currents at 90 degrees.

Or at least a description that likely allows for better comprehension and maybe reproduction.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)