Q&A Practical build log generator Figuera

[Escumo]

good afternoon Lasco, now it is summer and it is very hot in the south of Spain and I am on the beach outside my place of action on Figuera, that is, outside my workshop where I make my prototypes, but what I do do is continue thinking about the Figuera circuit, and in this sense and as I had already said in this chat, the question of Figuera involves doing a V/I conversion since it is necessary to increase I to be able to generate induction, that is, I continue with my idea of using the I through Inductors and not on Resistors, in addition and as I think everyone knows, the machine that does this is currently in service, it is called an Electrical Autotransformer, only you have to understand its operation in another shared mode scenario and as Figuera said: I have only made one electrical transformer differently, but only one electrical transformer. Well, I'm going down this path and first I have to calculate all the parameters before executing anything. I hope you can understand what I have written to you and a lot!! Cheer up !!

[Jim Mac]

Hello Jim

Would it be possible for you to do this experiment on video?
You are so good with it
That will definitely help others to see the light 
I will do some simple drawings and some picture to assist you 
I'm not as that fluent with social media 


Lasco

Hey Lasco..

This is the circuit we spoke of a while ago, creating positive bias sinewave from a single AC supply. The frequency is preserved the same as the source and the output wave is like the Figuera, where it uses impedance to shrink the wave.

   

Here is the output wave.  If you want to change the voltage of the supply, you must turn the supply off and drain the cap before adjusting the voltage.

   

Here is my messy circuit. I do not have a proper 1:1 transformer, so I am stepping it down then back up to achieve 1:1.

   

The circuit uses AC source and rectifies it to smooth DC. Then the AC is transformed and isolated, and placed in series with the DC.  Half the time the isolated AC opposes the DC current creating impedance that brings the voltage to zero, then the other half wave the AC sums in series with the DC and goes to peak. 

In my mind, this mimics a magnet moving towards and away from a coil.  Instead of the magnet creating physical distance from the magnet, we are now creating impedance between the primary and supply on the shrinking wave.

[Escumo]

Hello Jim

Would it be possible for you to do this experiment on video?
You are so good with it
That will definitely help others to see the light 
I will do some simple drawings and some picture to assist you 
I'm not as that fluent with social media 


Lasco

Hey Lasco..

This is the circuit we spoke of a while ago, creating positive bias sinewave from a single AC supply. The frequency is preserved the same as the source and the output wave is like the Figuera, where it uses impedance to shrink the wave.



Here is the output wave.  If you want to change the voltage of the supply, you must turn the supply off and drain the cap before adjusting the voltage.



Here is my messy circuit. I do not have a proper 1:1 transformer, so I am stepping it down then back up to achieve 1:1.



The circuit uses AC source and rectifies it to smooth DC. Then the AC is transformed and isolated, and placed in series with the DC.  Half the time the isolated AC opposes the DC current creating impedance that brings the voltage to zero, then the other half wave the AC sums in series with the DC and goes to peak. 

In my mind, this mimics a magnet moving towards and away from a coil.  Instead of the magnet creating physical distance from the magnet, we are now creating impedance between the primary and supply on the shrinking wave.

Good afternoon, this is a great and unique idea. I don't know of any circuit like this, mixing AC and DC in series is a stroke of genius. Cheer up!!!

---

       

---

Hello Jim

Would it be possible for you to do this experiment on video?
You are so good with it
That will definitely help others to see the light 
I will do some simple drawings and some picture to assist you 
I'm not as that fluent with social media 


Lasco

Hey Lasco..

This is the circuit we spoke of a while ago, creating positive bias sinewave from a single AC supply. The frequency is preserved the same as the source and the output wave is like the Figuera, where it uses impedance to shrink the wave.



Here is the output wave.  If you want to change the voltage of the supply, you must turn the supply off and drain the cap before adjusting the voltage.



Here is my messy circuit. I do not have a proper 1:1 transformer, so I am stepping it down then back up to achieve 1:1.



The circuit uses AC source and rectifies it to smooth DC. Then the AC is transformed and isolated, and placed in series with the DC.  Half the time the isolated AC opposes the DC current creating impedance that brings the voltage to zero, then the other half wave the AC sums in series with the DC and goes to peak. 

In my mind, this mimics a magnet moving towards and away from a coil.  Instead of the magnet creating physical distance from the magnet, we are now creating impedance between the primary and supply on the shrinking wave.

Good afternoon, this is a great and unique idea. I don't know of any circuit like this, mixing AC and DC in series is a stroke of genius. Cheer up!!!

---

Do you remember this diagram? I contacted you through it and it is very similar to the one you made today. Good luck!!!

[Lasco]

Thank you for Jim’s encouragement and constant input into forum.
This great input opened for me new ideas on practical build of part G and the “clicker or whatever name we will call it “

It is going to be like this - see photos
Progress will follow 

               

[Lasco]

Jim is driving force for me with his never ending passion to replicate patents from Clemente Figuera 

I have fail so many times it is not funny anymore.
How ever I have friend who is able to channel information from Akashic records I had three hours with attempt to ask Mr Figuera many questions 
Here we go:
Question 
Patent is showing N and S primary coils is that just name or it is polarity displayed 
A/ coil must have polarity as per patent description and drawing poles of electromagnets must be in attraction 
Q/ 
Where the energy coming from ?
A/ it is the same energy recirculating from N and S coils 
As one primary is filling the other is emptying into filling and vice versus 
This is actually using its own energy over and over again and only small portions from induced is needed to maintaining it running 
Q/
Do we need to use battery ?
A/ yes battery is essential to start and then it is maintained by running generator 
Q/ have you passed natural way through old age?
A/ no my life was taken away from me 
Q/ what we missing why we can’t replicate your invention?
A/ there is “ticker” that drives this devise 
Q/ can you please specify this “ticker”?
A/ it is very simple and you will work it out

You may laugh but this took the place and with a bit of mystery I have started looking at Figuera with different understanding 

Result is this

   

As you see suddenly strong sinus wave reappear on my scope

It needs lots of running but there is light on the end off the tunnel

[Escumo]

Congratulations! It seems like progress is being made. However, only an inverter with two pulsed primaries at 24 V DC has been defined, and we can obtain 480 or 980 V AC. This additionally means nothing more than the output of a mechanical inverter through a secondary winding. However, Lasco's arguments and work are very well done. Congratulations. Indeed, it is energy that is put into play, which is constantly renewed. The counter-electromotive force and flyback depend on the core, its dimensions, and characteristics. The way to renew it is to constantly create the same action, obtaining the same response. Those of us who are involved in this matter are driven by the action of the matter in play, and it is that matter that exerts the action continuously and renewed in each half cycle. If you are even slightly interested in the mechanical inverter, there are videos on the Internet; I've attached one of them, along with my own schematic in case you're interested.

https://youtu.be/Dvi1y-SKbLM?si=kXHxRl4LeKJGx9w-

---

Congratulations! It seems like progress is being made. However, only an inverter with two pulsed primaries at 24 V DC has been defined, and we can obtain 480 or 980 V AC. This additionally means nothing more than the output of a mechanical inverter through a secondary winding. However, Lasco's arguments and work are very well done. Congratulations. Indeed, it is energy that is put into play, which is constantly renewed. The counter-electromotive force and flyback depend on the core, its dimensions, and characteristics. The way to renew it is to constantly create the same action, obtaining the same response. Those of us who are involved in this matter are driven by the action of the matter in play, and it is that matter that exerts the action continuously and renewed in each half cycle. If you are even slightly interested in the mechanical inverter, there are videos on the Internet; I've attached one of them, along with my own schematic in case you're interested.

https://youtu.be/Dvi1y-SKbLM?si=kXHxRl4LeKJGx9w-

It is obvious that electronics do not play any relevant role in the electrical-mechanical inverter circuit and this shows us the greatness of Figuera and the poverty of electronics compared to mechanics when it comes to managing energy flows in constant destruction and generation.

[Escumo]

perdonad  mi torpeza en el manejo de estos chismes electrónicos, además de mi bajo nivel de inglés, no obstante, ya he hecho algunas  determinaciones respecto a Figuera en este portal, entiendo que no han sido consideradas de acuerdo al nivel que exponían o no han sido entendidas por el tema lingüístico, hablo sólo Español y tengo que usar traductores que, seguro, no explican de forma concisa y clara lo que pretendía. La filosofía del sistema Figuera radica en: la acción o finalidad y el camino para conseguirla, de modo, que la acción requiere una energía que debe llegar al lugar de acción y por tanto recorrer un camino, por tanto, la energía se va renovando micra a micra a lo largo del camino.    Normalmente no se usa la energía del camino y es la qué permite obtener más energía, pues, su nivel depende de la finalidad, es decir, de su acción y un poco del camino seguido por ella.  En este contexto, ¿ qué finalidad tiene la energía puesta en juego en el sistema Figuera ? es la de crear campo magnético, de modos diferentes, para crear inducción ( especial no la de Faraday ) y para que se mueva un pequeño motor, la finalidad es crear campo magnético con dos usos diferentes de forma continua en dos semiciclos en los cuales se invierten los sentidos de la energía gracias al motor que la mueve y la dirige. En la imagen enviada, más arriba, se puede ver de forma simple, espero se entienda.

Please forgive my clumsiness in handling this electronic gadget, in addition to my low level of English, however, I have already made some determinations regarding Figuera on this portal, I understand that they have not been considered according to the level they exposed or have not been understood due to the linguistic issue, I only speak Spanish and I have to use translators who, surely, do not explain concisely and clearly what I intended. The philosophy of the Figuera system is based on: the action or purpose and the path to achieve it, so that the action requires an energy that must reach the place of action and therefore travel a path, therefore, the energy is renewed micron by micron along the path. Normally, the energy of the path is not used and it is what allows to obtain more energy, since its level depends on the purpose, that is, its action and a little of the path followed by it. In this context, what purpose does the energy put into play have in the Figuera system? is to create a magnetic field, in different ways, to create induction (not Faraday's special one) and to move a small motor, the purpose is to create a magnetic field with two different uses continuously in two half-cycles in which the directions of the energy are reversed thanks to the motor that moves and directs it. In the image sent above, you can see it in a simple way, I hope it is understood.

---

https://youtu.be/Dvi1y-SKbLM?si=On2G4st9MotMzzOf

en este vídeo podemos ver medio sistema Figuera, cómo usan el eje del motor para distribuir un potencial entre dos bobinados primarios y es muy interesante, porque es como lo hace Figuera en sus patentes, usa el eje del motor como eje en revolución para, y mediante la escobilla, distribuir el potencial eléctrico entre el primario o los primarios en una distribución en paralelo a diferencia de Figuera que lo hace en serie este detalle es de suma importancia a la hora de comprobar resultados óptimos.

In this video we can see half of the Figuera system, how they use the motor shaft to distribute a potential between two primary windings and it is very interesting, because it is how Figuera does it in his patents, he uses the motor shaft as an axis of revolution to, and through the brush, distribute the electrical potential between the primary or primaries in a parallel distribution unlike Figuera who does it in series this detail is of utmost importance when checking optimal results.

[Lasco]

It is obvious that electronics do not play any relevant role in the electrical-mechanical inverter circuit and this shows us the greatness of Figuera and the poverty of electronics compared to mechanics when it comes to managing energy flows in constant destruction and generation.

hello Escumo

Your drawing is describing exactly how I build it 

I will following my practical build with additional details

[Lasco]

Try this