Posts: 975
Threads: 63
Joined: May 2023
Reputation:
56
Hello,
I have been experimenting with positive biased sinewaves, creating induction without changing input current direction. I think there is much to be discovered here.
One side weakens as the other strengthens, and it uses like polarities. It simulates a permanent magnet in motion passing a coil.
I will be updating as I continue
Posts: 975
Threads: 63
Joined: May 2023
Reputation:
56
Here is a Bifilar setup creating Virtually rotating magnetic field. it is mimicking a magnet spinning. It has a full North and South pole that rotate around..
The Bifilar coils I am using are being powered from both ends opposite ways to get the 2 polarities. They work well, but I think using regular EL-magnets will be better because they are inducting into each other as Shylo predicted.
But it has the overlap, it has the proper incline / decline, and the motion is damn near perfect.
Posts: 78
Threads: 1
Joined: Aug 2023
Jim use the bifilar coils but connect them like intended Tesla's.
Perhaps the use of caps to feed the coils would give the time for overlap?
During drain switch before empty to next full but reverse polarity.
Thanks shylo
Posts: 78
Threads: 1
Joined: Aug 2023
Jim I think you may have solved your own problem.
Your rotor on the other thread, just surround it with coils and use the output for your input.
Don't know if it will work but it's worth a try.
Thanks shylo