09-27-2023, 03:56 PM
I looked at all geometries for the way to make this thing mimic a full magnet flipping 2 polarities. One polarity going up, the other down. On both sides and opposite from each-other.
I want to use ONE coil with a Metal core. And I want the coil's exact center to be aligned exactly between all magnets at all times. so the coil can not be on the outside. Coil must be on the inside. I want each pole of the rotor to have Both Polarity magnets balanced on each end of the coil's pole.
Neither of the 2 original layouts will work to accomplish this. Both proposed designs so far are 1/2 way there... The answer is combining designs..
Funny enough- it makes the Free Mason logo and resembles the as above so below symbol. It is 2 sinewaves 180 degrees out of phase.
If we put 1 oval shaped inductor coil inside- I think this thing will be perfectly balanced (magnetically) and should induct nicely.
So instead of wasting lots of wire winding my big imbalanced coil- I am thinking this way is superior.
I want to use ONE coil with a Metal core. And I want the coil's exact center to be aligned exactly between all magnets at all times. so the coil can not be on the outside. Coil must be on the inside. I want each pole of the rotor to have Both Polarity magnets balanced on each end of the coil's pole.
Neither of the 2 original layouts will work to accomplish this. Both proposed designs so far are 1/2 way there... The answer is combining designs..
Funny enough- it makes the Free Mason logo and resembles the as above so below symbol. It is 2 sinewaves 180 degrees out of phase.
If we put 1 oval shaped inductor coil inside- I think this thing will be perfectly balanced (magnetically) and should induct nicely.
So instead of wasting lots of wire winding my big imbalanced coil- I am thinking this way is superior.